Important Control Panel Features; Programme Selector; Additional Option Buttons; Selecting The Spin Speed - Miele W 489i WPS Operating Instructions Manual

The programme selector is used to set
the basic wash programme and the
temperature for that programme. The
light ring will go out a few minutes after
the end of the programme to save
energy.
Additional options can be added to the
basic programme.
Pressing the relevant button selects or
de-selects the particular option. The
indicator light comes on to show that
the additional option has been
selected.
If an additional option is chosen which
is incompatible with the basic
programme then the indicator light will
go out when the button is released.
The maximum spin speed which can be
selected depends on the basic
programme chosen.
1600 COTTONS, Quick wash, Starch,
Drain/spin
1200 WOOLLENS, Separate rinse
900 MINIMUM IRON, Mixed wash
600 DELICATES
400 Silks
Press the "Spin" button to select a
different spin speed. However, you
cannot select a spin speed higher than
the maximum allowed for the basic
wash programme chosen.
The indicator lights show the speed
selected.
^ Press the "Spin" button to reach:
– Rinse hold
The laundry is not spun and remains
suspended in the final rinse water. This
reduces creasing if the laundry is not
going to be removed from the drum im-
mediately after the end of the
programme.
To continue the programme select a
spin speed. When the programme is
finished the Anti-crease/Finish light will
come on. Turn the programme selector
to the Finish position and press the
door button to open the door and
remove the laundry.
– Without spin
The laundry is not spun after the final
rinse. After the water has been drained
away the machine goes straight into the
anti-crease stage. Spinning between
the rinses is also omitted in this setting
(rinse and interim spin).
13