Mercedes-Benz ML350 Operator's Manual page 89

Safety and Security
Occupant safety
Child seat anchors – LATCH type
This vehicle is equipped with two LATCH
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a LATCH child
seat with matching mounting fittings.
1 Cover, indicator for anchor location
If installed, pry off cover using a suit-
able tool (screwdriver etc.).
The anchors are now visible and acces-
sible.
88
2 Anchor
Install child seat according to the
manufacturer's instructions.
i
The child seat must be firmly attached
in the right and left side anchors 2.
!
Make sure the seat belt for the center
seat can operate freely with a child
seat installed.
i
Non-LATCH type child seats may also
be used and can be installed using the
vehicle's seat belt system. Install child
seat according to the manufacturer's
instructions.