Mercedes-Benz ML350 Operator's Manual page 88

Installation of infant and child restraint
system
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
1 Anchorage ring
2 Hook
Release the rear seat backrest
( page 261).
Fold rear seat backrest slightly
forward.
Guide top tether strap between head
restraint and top of seat back.
Head restraint must be installed and
positioned such that the top tether
strap can pass freely between the head
restraint and top of seat back.
Make sure the tether strap is not twist-
ed.
Example for tether strap
1 Anchorage ring
2 Hook
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 1.
Safety and Security
Occupant safety
i
For safety, make sure the hook has at-
tached to the ring beyond the safety
catch, as illustrated.
Swing rear seat backrest to the rear un-
til it engages.
Check the rear seat backrest to be
locked in its upright position
( page 262).
Warning!
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, or the extended cargo area is not in
use. Check for secure locking by pushing
and pulling on the backrest.
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Tigthen the top tether strap
according to the child restraint manufac-
turer's instructions.
G
87