Mercedes-Benz ML350 Operator's Manual page 41

Getting started
Adjusting
Seat cushion tilt
Press the switch up or down in the
direction of arrow 2 until your upper
legs are lightly supported.
Seat backrest tilt
Press the switch forward or backward
in the direction of arrow 4 until your
arms are slightly angled when holding
the steering wheel.
40
Head restraint height
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
ble.
Vehicles with memory function*:
Press switch 1 ( page 39) up or
G
down in the direction of arrow.
Vehicles without memory function*:
1 Release button
Raising:
Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 in direction of
arrow and pull the head restraint up.