Alpine iDA-X305S Owner's Manual page 47

USB cable connection
Insert a USB cable into the unit, and fix with a lock screw.
iPod/iPhone Connection (sold separately)
Connect USB cable to an iPod/iPhone with iPod Dock interface
cable.
iPod Dock interface Cable
Remove the iPod/iPhone
Remove the iPod/iPhone from the iPod Dock interface cable.
• After changing the unit to a source other than the iPod, remove the
iPod/iPhone. If the iPod/iPhone is removed in the iPod mode, data
may cause damage.
• If sound is not output or the iPod/iPhone is not recognized even when
the iPod/iPhone is connected, remove the iPod/iPhone once, then
connect it again, or reset the iPod/iPhone.
• Before connecting the iPod/iPhone to this unit, set the EQ function of
iPod/iPhone to OFF.
• Do not leave the iPod/iPhone in a vehicle for a long time. Heat and
humidity may damage the iPod/iPhone and you may not be able to
play it again.
USB Cable
USB cable
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
USB memory
Remove USB memory
Pull out USB memory squarely from the USB cable.
USB memory
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
Portable Audio Player Connection (sold separately)
Connect Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
Supplied cable for the Portable audio player
Remove Portable audio player
Disconnect the Portable audio player from the supplied
player cable.
• Refer also to the Owner's Manual of the Portable audio player.
USB cable
USB cable
USB cable
45
-EN