Indication For Usb Memory - Alpine iDA-X305S Owner's Manual

• The iPod/iPhone is not verified.
- Reset the iPod/iPhone.
- Try another iPod/iPhone.
No Stations
• You have not created any personalized Pandora Stations.
- When you are not driving, use the Pandora Compatible
Application for iPhone to create your Pandora station(s).
(Pandora Radio mode)
• The music cannot be played because the Pandora Compatible
Application for iPhone requires the user's attention.
- When you are not driving, please see the Pandora Compatible
Application for iPhone.

Indication for USB memory

Current Error
• Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
USB memory is a malfunction or it is shorted.
- Connect another USB memory.
USB Device Error
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
No USB Device
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
40
-EN
(Pandora Radio mode)
No Support
• Text information that is not recognizable by the unit has been
input.
- Use a USB memory device with input text information that is
supported by the unit.
Indication for Portable audio player Mode
Current Error
• Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
- Attempt to connect another Portable audio player.
USB Device Error
• A Portable audio player that is not supported by the unit is
connected.
- Attempt to connect another Portable audio player.
No USB Device
• A Portable audio player is not connected.
- Make sure the Portable audio player is correctly connected and
the cable is not excessively bent.
• There are no songs in the Portable audio player.
- Download songs to the Portable audio player and connect to
this unit.
No Support
• Text information that is no supported on the unit has been input.
- Use an Portable audio player in which text information is input
that is supported on the unit.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
- Make sure the Portable audio player is set to MTP.
• Communication error
- Turn the ignition key off, and then set to ON again.
- Verify in the display after reconnecting the Portable audio
player to the connection cable.