Terminology; Sound Setting; Adjusting Subwoofer Level/Balance (Between Left And Right)/Fader (Between Front And Rear)/Black Out/Defeat - Alpine CDA-117 Owner's Manual

Verify the writing order in the software's documentation. The playback
order of the folders and files is as follows.
Root folder
Folder
The folder No./ folder Name will not be displayed if no file is contained
in the folder.

Terminology

Bit rate
This is the "sound" compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher
the sampling rate, the higher the sound quality, but also the larger the
volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into the
specified audio compression format.
Tag
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically
for all burned discs.
*
MP3/WMA/AAC File

Sound Setting

Rotary encoder/ENTER/
SOURCE/
/ESC
BAND
 
Preset buttons (1 through 6)
Adjusting Subwoofer Level/Balance
(Between Left and Right)/Fader (Between
Front and Rear)/Black Out/Defeat
1
Press AUDIO repeatedly to choose the desired mode.
Each press changes the mode as follows:
*1
 BALANCE  FADER  BLACK OUT
SUBWOOFER
 VOLUME  SUBWOOFER
When the subwoofer mode is set to OFF, its level cannot be
adjusted, refer to "Turning Subwoofer ON/OFF" on page 16.
When Blackout mode is turned on, after 5 seconds, all display
indications on this unit will turn off to reduce power
consumption. This additional power enhances the sound quality.
Subwoofer level
Balance
Fader
Black Out
Defeat
Volume
Notes
• If no operation is performed for 5 seconds after selecting the
SUBWOOFER, BALANCE, FADER, BLACK OUT or DEFEAT mode,
the unit automatically returns to normal mode.
• If any button on the unit is pressed during the Blackout Mode, the
function is displayed for 5 seconds before returning to Blackout mode.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
Note
• Depending on the connected devices, some functions and display
indications do not work.
AUDIO/SOUND SETUP
*2
 DEFEAT
0 ~ 15
−15 (L) ~ 15 (R)
−15 (R) ~ 15 (F)
ON/OFF
ON/OFF
0 ~ 35
15
-EN