Windows 98Se - Intel WSAP5000 - PRO/Wireless 5000 LAN Access Point Quick Installation Manual

o
click Configure to set up a profile using configuration
information obtained from your network administrator. On the
My WLAN Places dialog, click the New button to create a new
profile. Type a configuration name and the SSID for your
wireless network. Set up security and other parameters if
required. Consult your network administrator. Click OK to close
the dialog. Click OK to finish setting up the profile, then click
Close.
•
On the Found New Hardware Wizard screen, click Finish.
Proceed to Step 4.
Windows Me
•
The Add New Hardware Wizard dialog displays. DO NOT click
Next yet. Verify that Automatic search for a better driver
(Recommended) is checked.
•
Insert the Intel CD-ROM into your CD-ROM drive. Windows installs
the driver from the CD-ROM. If the Intel® PRO Network
Connections menu appears, leave it open.
•
On the New Hardware Wizard screen, select Search for the best
driver for you device (Recommended), and click Next, then
select CD-ROM drive and click Next.
•
The Adapter Properties screen displays. On the Settings tab:
o click OK to install using a default profile or
o click Configure to set up a profile using configuration
information obtained from your network administrator. On the
My WLAN Places dialog, click the New button to create a new
profile. Type a configuration name and the SSID for your
wireless network. Set up security and other parameters if
required. Consult your network administrator. Click OK to close
the dialog. Click OK to finish setting up the profile, then click
Close.
•
On the Add New Hardware Wizard screen, click Finish.
•
When prompted to restart the computer, click No. Proceed to Step
4. Restart manually after completing software installation.

Windows 98SE

•
The Add New Hardware Wizard dialog displays. Click Next.
•
Insert the Intel CD-ROM into your CD-ROM drive. If the Intel® PRO
Network Connections menu appears, leave it open.
•
On the New Hardware Wizard screen, select Search for the best
driver for you device (Recommended), and click Next, then
select CD-ROM drive and click Next.
•
The Adapter Properties screen displays. On the Settings tab:
o
click OK to install using a default profile or
o
click Configure to set up a profile using configuration
information obtained from your network administrator. On the
My WLAN Places dialog, click the New button to create a new
16