Table of Contents
Advertisement
Installing the CardBus Adapter
Package Contents
•
Intel® PRO/Wireless 5000 LAN CardBus Adapter (model WCB5000)
•
CD-ROM containing software and user documentation
•
Quick Installation Guide (this manual)
Hardware Installation
1.
Turn on power to the computer and wait for Windows* to load. Windows
XP, 2000, Me, or 98SE is required.
2.
Insert the CardBus Adapter into the CardBus PC Card slot on your
computer, then proceed to Step 3 to install drivers and software under
the Windows operating system.
Windows* Installation
3.
Windows will detect the adapter. Follow the procedures below for your
version of Windows, then continue with Step 4:
Windows XP
Before proceeding, make sure that you are operating Windows XP
with administrative rights. If you log in to Windows XP without
administrative rights, you may run into problems during the installation.
The Intel® PROSet II utility or Windows XP can be used to
configure wireless network settings. The instructions below include
steps for installing the PROSet II utility and for turning off the Windows
XP configuration feature. For information on the Windows XP feature,
see your Windows XP documentation.
•
The Found New Hardware Wizard dialog displays. Verify that
Install the software automatically (Recommended) is checked.
14
Advertisement
Chapters
Table of Contents
