Table of Contents
Advertisement
•
Insert the Intel CD-ROM into your CD-ROM drive. The New
Hardware Found Wizard searches for the correct driver files and
copies them to your hard drive. If the Intel® PRO Network
Connections menu screen appears, leave it open.
•
If a Windows Logo testing dialog appears, click Continue Anyway.
•
When the My WLAN Places screen appears, click Next. You will
return to this configuration screen later to configure wireless
settings.
•
On the Found New Hardware Wizard screen, click Finish.
•
Click Start, Settings, and Control Panel.
•
Double-click Network Connections.
•
In the LAN or High-Speed Internet window right-click the Wireless
Network Connection and select Properties.
•
Select the Wireless Network tab.
•
Click to clear the check box Use Windows to configure my
wireless network settings, then click OK on the Wireless
Network tab. Do not click any other tabs.
•
In the LAN or High-Speed Internet window right-click the Wireless
Network Connection and select Properties.
•
Select the General tab and click Configure.
•
Select the My WLAN Places tab.
click OK to install using the default profile or
o
click New to set up a profile using configuration information
o
obtained from your network administrator. Type a configuration
name and the SSID for your wireless network. Set up security
and other parameters if required. Consult your network
administrator. Click OK to close the dialog. Click OK to finish
setting up the profile. Close the LAN or High Speed Internet
window.
•
Proceed to Step 4.
Windows 2000
You must be logged on as an administrator or member of the
administrator's group to install a new device under Windows 2000.
•
The Found New Hardware Wizard dialog displays. Click Next. The
Install Hardware Device Drivers dialog displays.
•
Insert the Intel CD-ROM into your CD-ROM drive. If the Intel® PRO
Network Connections menu screen appears, leave it open.
•
On the Install Hardware Device Drivers screen verify that Search
for a suitable driver for my device (recommended) is selected,
then click Next.
•
The Locate Driver Files dialog appears. Select Specify a
location, select CD-ROM and click Next.
•
The Adapter Properties screen displays. On the Settings tab:
o
click OK to install using a default profile or
15
Advertisement
Chapters
Table of Contents
