Download Print this page

Panasonic AJ-PCD30PJ Brochure page 9

Brochure
Hide thumbs Also See for AJ-PCD30PJ:

Advertisement

memory Card Camera recorder "P2 cam"
AG-HPX370
series
(AG-HPX370/371/372/373/374)
Full F10*
Sensitivity from a Newly Developed MOS Image Sensor.
1
High-Quality Images in a Lightweight, Mobile, Compact Body.
• Featuring a new 1/3 type MOS sensor for full-HD (1920 x 1080) resolution
and F10*
sensitivity.
1
• Comes mounted with a Fujinon 1/3 type 17x zoom lens (included)
• Chromatic Aberration Compensation (CAC) function.
• DRS (Dynamic Range Stretch) provides a wider dynamic range.
• Recording format: AVC-Intra100, AVC-Intra50 and DVCPRO HD.
• HD multi-format recording: 1080i and 720p.
• SD multi-codec recording in DVCPRO 50/DVCPRO/DV.
• 59.94 Hz/50 Hz selector function.
• Variable frame rate feature (in 720p, 20 steps) allows film-like
slow-speed or quick-speed shooting.
• Seven-mode gamma, includes two Cine-Like modes.
• This redesigned shoulder-mount camera has a low center of gravity.
• Two P2 card slots are provided on the operation panel side.
• The One-Clip Record function enables multiple clips that are recorded
separately by start/stop operations to be handled as a single clip.
• Scene file, user buttons, and focus assist functions
• Waveform and vectorscope display.
• A color viewfinder featuring the Liquid Crystal On Silicon (LCOS) display
panel for bright, high-resolution images.
• A high resolution, 16:9 aspect ratio, 81.28 mm (3.2 inches) LCD monitor.
• Output for HD/SD SDI and Video, with built-in downconverter.
• USB 2.0 (Host/Device) and IEEE 1394a (AVC)*
GENLOCK IN terminals.
• RCU terminal for optional AJ-RC10G or AG-EC4G remote control unit.
• Proxy data recording possible (with the optional AJ-YAX800G).
• Camera studio system (option) is supported.
*1: Its sensitivity is F10 in 1080/59.94i and F11 in 1080/50i.
*2: IEEE 1394a input/output are not available AVC-Intra codec files.
AG-HPX370 series Specification
Power Source :
DC 12 V (11 V to 17 V)
Power Consumption :
approx. 19 W, with VF, lens and LCD monitor ON
Weight:
approx. 3.6 kg (7.9 lb), without Lens, approx. battery and accessories
Dimensions (W x H x D): 246 mm x 251 mm x 441 mm
(9-11/16 inches × 9-7/8 inches × 17-3/8 inches )
excluding prominent parts
246 mm x 251 mm x 549 mm
(9-11/16 inches × 9-7/8 inches × 21-5/8 inches )
with Fujinon lens, excluding prominent parts
2
interfaces. TC IN, TC OUT and
AG-HPX500
series
(AG-HPX500/502)
Outstanding Cost-to-Performance and Superb 2/3 type Quality —
the P2HD Camera Recorder for Video Professionals
• Standard 2/3 type interchangeable lens mount system.
• The Chromatic Aberration Compensation (CAC) function compensates for
slight chromatic aberration at frame edges that cannot be compensated for
by the lens (this function requires the use of a CAC-compatible lens).
• APT (Advanced Progressive Technology) produces higher image quality with
HD Progressive 3 CCD and 19 bit digital signal processor.
• 1080i and 720p HD recording using the DVCPRO HD codec for broadcast use
assures both superior images and top reliability.
• 50 Hz/60 Hz selector function allows 1080/50i and 720/50p HD recording
for PAL areas.
• SD (480i/576i) recording in DVCPRO 50, DVCPRO or DV multi-codec.
• Four P2 card slots allow continuous recording, card selection, hot swapping,
loop rec, pre-rec, interval rec and one-shot recording.
• Text memos and shot markers can be added.
• 48 kHz/16 bit, 4 channel digital audio recording.
• Variable frame rate feature (in 720p, 11 steps) allows film-like
slow-speed or quick-speed shooting.
• 720p native mode achieves a speed effect without requiring additional
equipment. A VariCam-compatible 720p over 60p mode is also provided.
• Seven-mode gamma, includes two Cine-Like modes.
• Slow, synchro and high-speed shutter.
• Scene file, user buttons, user menu and focus assist functions.
• Output for HD/SD SDI (BNC), Video (BNC) and Component (D4), with built-in
downconverter.
• TC input/output provides multi-camera synchro shooting.
• IEEE 1394a (AVC, Host and Device), USB 2.0 (Device) interface.
• RCU terminal for optional AJ-RC10G or AG-EC4G remote control unit.
• Camera studio system (option) is supported.
AG-HPX500 series Specification
Power Source :
DC 12 V (11 V to 17 V)
Power Consumption :
approx. 23W with Viewfinder and LCD monitor on
Weight:
approx. 3.8 kg (8.4 lb), without viewfinder
Dimensions (W x H x D): 140 mm x 261 mm x 318 mm
(5-9/16 inches x 10-5/16 inches x 12-9/16 inches)
without handle (exclude projection)
8

Advertisement

loading

This manual is also suitable for:

Avc-ultraAvc-intra444