Channel Interleaving; Rank Interleaving - Gigabyte GA-H67MA-UD2H User Manual

 Advanced Memory Settings
Extreme Memory Profile (X.M.P.)
System Memory Multiplier
Memory Frequency (Mhz)
Performance Enhance
DRAM Timing Selectable
Profile DDR Voltage
Profile VTT Voltage
x Channel Interleaving
x Rank Interleaving
>>>>> Channel A
 Channel A Timing Settings
>>>>> Channel B
 Channel B Timing Settings
higf : Move Enter: Select
F5: Previous Values
Extreme Memory Profile (X.M.P.)
Memory Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Ad-
vanced Frequency Settings menu.
Performance Enhance
Allows the system to operate at three different performance levels.
Standard
Turbo
Extreme
DRAM Timing Selectable (SPD)
Quick and Expert allows the Channel Interleaving, Rank Interleaving, Channel A Timing Settings,
and Channel B Timing Settings items to be configurable. Options are: Auto (default), Quick, Expert.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this
item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2, this
item will display the value based on the SPD data on the XMP memory.
Profile VTT Voltage
The value displayed here is dependent on the CPU being used.

Channel Interleaving

Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS au-
tomatically configure this setting. (Default: Auto)

Rank Interleaving

Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access dif-
ferent ranks of the memory to increase memory performance and stability. Auto lets the BIOS automati-
cally configure this setting. (Default: Auto)
(Note) This item is present only if you install a memory module that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Advanced Memory Settings
(Note)
(SPD)
1066
(SPD)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
(Note)
Lets the system operate at its basic performance level.
Lets the system operate at its good performance level. (Default)
Lets the system operate at its best performance level.
[Disabled]
[Auto]
1066
[Turbo]
[Auto]
1.5V
1.05V
Auto
Auto
[Press Enter]
[Press Enter]
F10: Save
, System Memory Multiplier (SPD),
- 39 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup