Timer Operation - Fujitsu AWYZ14LBC Operating Manual

TIMER OPERATION

Before using the timer function,be sure that the Remote Controller is set to the correct current time (See page 5).
To Use the OFF TIMER or ON TIMER
Open the Remote Controller lid to perform the timer function settings.
1 Press the desired Operation button or START/STOP
button (Fig. 5
(if the unit is already operating, proceed to step 2).
The Indoor Unit's OPERATION Indicator Lamp (red) (Fig. 2
2
Select the desired timer operation time, and then press
the OFF TIMER button (Fig. 5
ton (Fig. 5 ).
The OFF or ON timer indicator flashes.
3 Use the SET TIME buttons (Fig. 5
sired OFF time or ON time.
Button: Press to advance the time.The time advances in 5-minutes
increments.
Button: Press to reverse the time.The time goes backward in 5-minute
increments.
4 Point the Remote Controller towards the Indoor Unit
and press the SET button (Fig. 5
The OFF or ON timer Indicator stops flashing.
The TIMER Indicator Lamp (green) (Fig.2
If the ON TIMER function is selected, the air conditioner operation stops.
To Use the Program timer
1 Press the START/STOP button (Fig. 5
(if the unit is already operating, proceed to step 2).
The Indoor Unit's OPERATION Indicator Lamp (red) (Fig. 2
2 Set the desired times for OFF timer and ON timer.
See the section "To Use the OFF timer or ON timer" to set the desired
mode and times.
The indoor unit's TIMER Indicator Lamp (green) (Fig.2
About the Program timer
G The PROGRAM timer allows you to integrate OFF timer and ON timer operations
in a single sequence. The sequence can involve one transition from OFF timer to
ON timer,or from ON timer to OFF timer,within a twenty-four hour period.
G The first timer function to operate will be the one set nearest to the current
time.The order of operation is indicated by the arrow in the Remote Controller's
display (OFF → ON,or OFF ← ON).
G One example of PROGRAM timer use might be to have the air conditioner auto-
matically stop (OFF timer)after you go to sleep,then start (ON timer)automatically
in the morning before you arise.
).
) or the ON TIMER but-
) to adjust the de-
).
)on the Indoor Unit will light.
To Cancel the Timer
Press the CANCEL button.
To Change the Timer Settings
Perform operations 2–4.
To Stop Air Conditioner Operation
) will light. while the Timer is Operating
Press the START/STOP button.
To Cancel the Timer
Press the CANCEL button.
TIMER Indicator Lamp (green) will go
out.Canceling the OFF TIMER or the ON
)
TIMER
1. Press the TIMER button of the function to
) will light.
cancel (OFF or ON).
2. Press the CANCEL button.
To Change the Timer Settings
1. Press the TIMER button of the function
to change (OFF or ON).
) will light.
2. Set the timer using the "
TIMER buttons.
3. Press the SET button.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
" and " "
En-10