Trouble-Shooting - Silvercrest DV-767 Instruction Manual

26 Trouble-Shooting

Problem
Camera cannot be switched
on.
The device switches on, but
then switches off again after
a short time.
The camera switches itself
off automatically.
The battery runs down too
quickly.
The camera does not take a
photo after the capture
button has been pressed.
The image is out of focus.
The flash is not working.
The date and time are not
displayed correctly.
Cause
Battery not correctly inserted.
Battery not charged.
The battery is not
sufficiently.
Auto Off is activated, and the
camera switches off automatically
after a predefined time.
The ambient temperature is too
low.
The battery is overcharged.
The battery has exceeded its
lifetime.
The device has been used too
often as a flashlight (this uses too
much power).
The camera is not in Capture
mode.
The memory is full.
The lens is dirty.
The Capture Distance switch
not in its normal position.
The quality is set too low.
The flash is switched off.
The date and time have not been
set. The camera uses its standard
time.
Solution
Insert the battery correctly (see
page 9).
Use the mains supply or USB
cable to charge the battery (see
page 10).
Use the mains supply or USB
charged
cable to charge the battery (see
page 10).
Set Auto Off to meet your
requirements (see page 28).
Do not use the video camera in
extreme temperatures.
If the battery
charged for a very short time
after you have charged it, you
must replace
adapter. To do this, contact the
customer hotline (see the back
of the manual).
Change the battery. To do this,
contact the customer hotline
(see the back of the manual).
Only use the device seldom, in
order to save electricity.
Switch to Capture mode (see
page 11).
Delete data from your storage
medium or transfer data to your
PC (see page 39).
Insert an empty
medium into the device (see
page 12).
Clean the lens with a soft, dry
cloth.
is Set the Capture
switch to its normal position.
Set the quality to "Super" (see
page 15).
Set the Flash
"Automatic" (see page 19).
Set the date and time (see
page 28).
only stays
the mains
storage
Distance
mode to
47