Table of Contents
Advertisement
Quality
By using the Navigation button
compression rate (symbol
"Normal": maximum compression rate (lower memory consumption, poorest quality)
"Fine": medium compression rate
"Super": lowest compression rate (highest memory consumption, best quality)
Note:
For the best possible quality of image, select "Super". If you wish to use as little memory as
possible, select "Normal". The "Fine" setting is between the "Super" and "Normal" settings.
WB (White Balance)
By using the Navigation button
of WB. The effects of the respective settings are shown immediately in the display. Once you have
found a suitable setting, you can return to the settings by pressing the Navigation button
following WB settings are available (symbol
"Auto": The camera automatically sets the white balance.
"Sunlight": The camera semi-automatically sets the white balance. The camera assumes that
the surroundings are sunny.
"Tungs": The camera semi-automatically sets the white balance. The camera assumes that the
surroundings are lit by light bulbs.
"Fluor": The camera semi-automatically sets the white balance. The camera assumes that the
surroundings are lit by fluorescent lights.
"Cloudy": The camera semi-automatically sets the white balance. The camera assumes that the
surroundings are overcast or that it is dusk.
Note:
The semi-automatic WB with the settings "Sunlight", "Tungs", "Fluor" and "Cloudy" is always
preferable to the fully-automatic WB.
For further information on the WB, please read the "White Balance (WB)" chapter on page 45.
EV Bias
You can use the Navigation button
to +2.0 for the manual EV bias. The effects of the respective settings are shown
immediately in the display. Once you have found a suitable setting, you can return to the settings
by pressing the Navigation button
„0,0": no manual correction
"+0.3" to "+2.0": the image becomes lighter
"-0.3" to "-2.0": the image becomes darker
Note:
For example, use the EV bias for recordings with a back light ("+2.0).
For further information on EV bias, please read the "EV Bias" chapter on page 45.
Date Stamp
You can use the Navigation button
Stamp on your photos. Press the Navigation button
"On" option, then the date, on which the photo was taken, is displayed in the bottom right of the
screen. If the Date Stamp is activated, then the symbol
(
and
) you can choose the following settings for the
):
(
and
) you can choose between the different types
):
(
and
) to select between twelve values from –2.0
. The following values for the EV bias are available:
(
and
) to define whether or not you want a Date
to confirm your selection. If you select the
is displayed.
. The
21
Hide quick links:
Advertisement
Table of Contents
