Disconnecting From The Computer - Silvercrest DV-767 Instruction Manual

a

22.7 Disconnecting from the Computer

If you have connected the camera, as a mass storage medium, to your computer (USB mode:
MSDC), then you should never disconnect the camera without first safely removing the hardware
from your operating system. Failure to do this could result in the loss of data or damage to your
camera's memory.
For Windows 98SE, Me, 2000
Use the button to switch your camera off before you remove the USB connection cable.
For Windows XP:
1. Double click on the "Safely Remove
Hardware" symbol (it may be necessary to show
inactive symbols).
3. In the "Safely Remove Hardware" window,
select the "USB mass storage device" and click
on [OK].
42
2. In the "Safely Remove Hardware" window,
select the "USB mass storage device" and click
on [Close].
4. A message is displayed, which informs you
that you can now remove the device. Remove
your camera from the USB connection.