Breakout Box - Front; Breakout Box - Rear - ESI ESP1010e User Manual

High quality 8-in / 8-out pcie audio interface
Table of Contents

Advertisement

ESI
ESP1010e
2.2 Breakout Box – Front
The front panel provides the following connectors from left to right:
Microphone Input Channel 1/2 and Channel 3/4: 2 microphone inputs with XLR input for
dynamic and condenser microphones. When the first microphone input is in use, its input signal will
be recorded via input channel 1 and 2. When the second microphone input is in use, its input signal
will be recorded via input channel 3 and 4.
Hi-Z Instrument Inputs Channel 5/6 and Channel 7/8: 2 Hi-Z instrument input for guitars.
When the first Hi-Z input is in use, its input signal will be recorded via input channel 5 and 6. When
the second Hi-Z input is in use, its input signal will be recorded via input channel 7 and 8.
Analog Line Inputs Channel 1 to 4: 4 line level inputs for standard line signal and recording via
input channel 1 to 4.
Headphone Outputs 1 & 2: two independent stereo headphone outputs for the master monitoring
signal.
2.3 Breakout Box – Rear
The back panel provides the following connectors from left to right:
DC 12V 1A power supply connector: you can connect an optional (not included) DC 12V power
supply to ESP1010e via this connector. This might be required if you require stable +48V phantom
power supply for the two microphone inputs on the front. Please note that normally this power
supply is not required.
EDI II connector: use this connector to connect the external 19" rack with the PCIe card of
ESP1010e (see section 2.1 of this manual).
MIDI in and MIDI out connectors: 2 independent MIDI inputs and 2 independent MIDI outputs
for standard MIDI signals with 16 channels for each connector.
S/PDIF digital in & out connectors: 2 RCA connectors, for S/PDIF in (top) and S/PDIF out
(bottom). Connect these to other S/PDIF compatible equipment.
Analog Line Inputs Channel 5 to 8: 4 line level inputs for standard line signal and recording via
input channel 5 to 8.
Analog Line Outputs Channel 1 to 8: 8 line level outputs for standard line signal and playback via
output channel 1 to 8.
5

Advertisement

Table of Contents
loading

Table of Contents