Changing The Needle - Baby Lock ellegante 2 BLG2 Instruction And Reference Manual

CHANGING THE NEEDLE

• Always press
Stop button or another operation button is pressed accidentally, the machine will start and injury may
result.
• Use only sewing machine needles made for home use-type 130/705H needle. Other needles may bend or
break and may cause injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Memo
To check the needle correctly, place the flat
side of the needle on a flat surface. Check the
needle from the top and the sides. Throw
away any bent needles.
a Parallel space
b Level surface (bobbin cover, glass, etc.)
a
Press the "Needle Position" button to raise
the needle.
b
Press .
* If "OK to automatically lower the presser foot?"
appears on the LCD screen, press OK to continue.
→ The entire screen becomes white, and all keys and
operation buttons are locked.
Note
• Before replacing the needle, cover the hole
in the needle plate with fabric or paper to
prevent the needle from falling into the
machine.
CAUTION
on the screen before changing the needle. If
a
b
c
Use the screwdriver to turn the screw
toward the front of the machine and loosen
the screw, then remove the needle.
Note
• Do not apply pressure to the needle clamp
screw. Doing so may damage the needle or
machine.

CHANGING THE NEEDLE

is not pressed and the Start/
1
39