Baby Lock ellegante 2 BLG2 Instruction And Reference Manual page 181

f
Apply a thin layer of adhesive or spray
adhesive to the back of the appliqué piece
and attach it to the appliqué position so that
it follows the seam of the outline.
Memo
If the appliqué material is a lightweight fabric,
you may want to use a fusible web on the back
to stabilize the fabric and for appliqué
placement. Fuse appliqué in place with an
iron.
Do not remove fabric from the frame to iron
the appliqué material.
g
Press the "Start/Stop" button.
Memo
Some patterns may not show all three
appliqué steps. Sometimes the "Appliqué"
step will be shown as a color.
→ The appliqué will then be completed.
h
Change the upper thread and then carry out
the rest of the embroidering.
Memo
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern and then
clean away the glue.
• For best sewing results clip all threads
between color steps.
SEWING AN EMBROIDERY PATTERN
5
169