Care And Maintenance; Cleaning The Machine Surface; Cleaning The Race - Baby Lock Decorator's Choice BLDC2 Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Care and Maintenance

Simple sewing machine maintenance operations are described below.

Cleaning the machine surface

If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a wet cloth, wipe it again with a dry
cloth.
CAUTION
● Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
138

Cleaning the race

Sewing performance will suffer if dust collects in the
bobbin case; therefore, it should be cleaned
periodically.
a Turn off the sewing machine.
b Unplug the power cord from the power supply
jack on the right side of the sewing machine.
CAUTION
● Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
c Remove the flat bed attachment.
d Grasp both sides of the needle plate cover, and
then slide it toward you.
a Needle plate cover
The needle plate cover is removed.
a