Dc Operation - Honda EU3000i Handi Owner's Manual

OPERATION

DC OPERATION

The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
The DC receptacle can be used while the AC power is in use.
When using the AC power together with DC power, do not exceed 20.8
ampere AC load.
When using the DC output, turn the Eco-Throttle switch to the OFF
position.
Connecting the battery charging cable (optional equipment):
1. Before connecting the battery charging cable to a battery that is
installed in a vehicle, disconnect the vehicle battery ground cable
from the negative ( ) battery terminal.
WARNING: Battery posts, terminals, and related accessories contain
lead and lead components.
2. Plug the battery charging cable into the DC receptacle of the
generator.
34
The battery gives off explosive
hydrogen gas during normal
operation.
A spark or flame can cause the
battery to explode with enough
force to kill or seriously hurt you.
Wear protective clothing and a face
shield, or have a skilled mechanic
perform the battery maintenance.
Wash hands after handling.