Spark Arrester Maintenance
If the generator has been running,the muffler will be very hot. Allow it to
cool before proceeding.
pciEq
The spark arrester must be serviced every 100 hours to
maintain its efficiency.
Clean the spark arrester as follows:
1. Loosen @ two 8 mm nuts and 0 6 mm bolt to remove the @ muffler
assembly.
2. Loosen @ four 5 mm screws and remove the @ muffler protector
from the muffler.
3. Loosen @ 4 mm screw and remove @I spark arrester from the muffler.
4. Use a brush to remove carbon deposits from the spark arrester screen.
Inspect the screen for breaks or tears and replace it if necessary.
5. Install the spark arrester and the muffler in reverse order of disassembly.
31