Common Area Call Log Check Assignment - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming

Common Area Call Log Check Assignment

Description
Selection
Default
Programming
Condition
Feature Reference
Enables or disables checking call logs stored in the common area. If
enabled, the Caller ID Indication — Common button and Caller ID
Selection — Common button can be assigned.
• Jack number: 01 – 08,
• Disable / Enable
All jacks – Enable
1. Enter 909.
Display: Call Log Assign
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Call Log, Incoming
( = all jacks)
:Mixed.
System Programming
909
key in step 3. In
4-135