Panasonic KXTA308 - ANALOG PBX Installation Manual page 279

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature References
DISA No Dial Mode
Selects the mode when nothing is dialed after a beep after a
programmed length of time for the DISA1 mode. There are two
modes as follows.
Intercept: the call is directed to the extensions assigned in
programs [408]–[410] for the time programmed in
[509] "DISA Ringing Time after Intercept".
Disconnect: the call is disconnected.
• Intercept / Disconnect
DISA1 — Intercept
1. Enter 510.
Display: DISA No Dial
2. Press NEXT.
Display example: DISA1:Disconnect
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
None
Section 3, Features
Direct Inward System Access (DISA)
Intercept Routing
System Programming
510
4-87