Gigabyte GA-G41MT-D3 User Manual page 26

tRD Phase0 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase1 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase2 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase3 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
Trd2rd(Different Rank)
Options are: Auto (default), 1~15.
Twr2wr(Different Rank)
Options are: Auto (default), 1~15.
Twr2rd(Different Rank)
Options are: Auto (default), 1~15.
Trd2wr(Same/Diff Rank)
Options are: Auto (default), 1~15.
DIMM1 Clock Skew Control
Options are: Auto (default), +800ps~-700ps.
DIMM2 Clock Skew Control
Options are: Auto (default), +800ps~-700ps.
DDR Write Leveling
Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility.
Auto Lets the BIOS decide whether to enable this function. (Default)
Enabled Enables this function to enhance memory compatibility.
Disabled Disables this function.
DDR Write Training
Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility.
Auto Lets the BIOS decide whether to enable this function. (Default)
Enabled Enables this function to enhance memory compatibility.
Disabled Disables this function.
Channel A/B Driving Settings
x Driving Strength Profile
x Data Driving Pull-Up Level
x Cmd Driving Pull-Up Level
x Ctrl Driving Pull-Up Level
x Clk Driving Pull-Up Level
x Data Driving Pull-Down Level
x Cmd Driving Pull-Down Level
x Ctrl Driving Pull-Down Level
x Clk Driving Pull-Down Level
 : Move Enter: Select
F5: Previous Values
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Channel A/B Driving Settings
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
F10: Save
- 26 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults