Sonar/Cakewalk - ESI WaMi Rack 192 series Manual

ESI WaMi Rack 192 Series

4. Sonar/Cakewalk

Before you using Sonar, you have to do several setting first.
You have to set proper latency on the console of WaMi Rack 192 Series.
After launching sonar, Go to 'Option' -> Audio and select 'Wave Profiler' of 'General'
tab. Unless Sonar can't recognize buffer of WaMi Rack 192 Series.
In case of Sonar:
Like a next picture, select 'WaMi Rack 192 Multi-10ch 1~10' for using WDM driver.
Do not select 2 ch driver.
In case of Cakewalk:
Cakewalk has to use MME driver, therefore select 'WaMi Rack 192 1,2'(2 ch) driver.
32