Account Code Entry - AT&T MERLIN LEGEND Release 2.0 MLX-10 Non-Display Telephone Quick Reference Manual

OFTEN USED FEATURES
Callback
Use Callback to be notified when
a busy extension or outside line is
free. Callback works only for busy
extensions on ICOM button
phones; use Line Request for
busy outside lines. On SA button
phones, Callback works with busy
inside extensions; it works with
busy outside lines only on SA or
Pool buttons. Selective callback,
which activates feature on call-
by-call basis is available from a
feature code or from a pro-
grammed button. You must
program your phone for
automatic callback which
activates feature for every call.
To program a selective callback
button:
1.
Label a button.
2.
Press Feature and dial 00.
3. Press labeled button.
4.
Dial 55.
5.
Press Feature and dial
To use selective callback for busy
extension:
1.
Press programmed button,
or press Feature and dial 55
when you hear fast busy signal.
2.
Hang up after five short beeps.
3.
Lift handset after one long
ring and three short rings.
Call is placed after you lift
handset.
To use selective callback for busy
outside lines:
1.
Press Feature and dial 55
when you hear fast busy
signal, or press programmed
button.
2.
Hang up after five short beeps.
3.
Lift handset after one long ring,
and three short rings. Call is
placed when you lift the
handset.
To turn automatic callback on/off:
1.
Press Feature and dial 00.
2.
Press any ICOM or SA button.
3.
Dial 12 to turn on or
to turn off.
4.
Press Feature and dial
To use automatic callback:
1.
When you hear five short
beeps after you reach a
busy extension or outside
line, hang up.
2.
Lift handset after one long
ring and three short rings.
Call is placed when you lift
the handset.
To cancel a queued callback
request:
1.
Press the button the call is on.
2. Lift handset.
3.
Press Drop.
00.
4.
Press the button the call is
on .

Account Code Entry

To program:
1.
Label a button.
2.
Press Feature and dial 00.
3.
Press labeled button.
12
4.
Dial 82.
00.
5.
Press Feature and dial
To enter an account before calling:
1.
Press programmed Account
Code button, or press Feature
and dial 82.
2.
Dial account code, followed
by # .
3. Press outside line or SA button.
4.
Lift handset or press Speaker.
5.
Dial number (including dial-out
code if using SA button).
Repeat Steps 1 and 2 to change an
account code during a call. Caller
does not hear you enter the account
code. Account code cannot be
changed if it was already entered for
the call when the call arrived.
Hold
Press the Hold button to put a
call or conference on hold. As a
reminder, your phone beeps every
60 seconds.
00.