Honda EMS4000 Owner's Manual page 35

a. Remove the spark plug cover and cap. Clean any dirt from around
the spark plug base, then remove the spark plug.
b. Install the spark plug in the plug cap.
c. Turn the engine switch on.
d. Be sure the oil alert switch is on.
e. Grounding the side electrode to the stay, pull the recoil starter to see
if sparks jump across the gap.
OIL ALERT
ENGINE
SWITCH
GROUNDING
I
I
SV?T CH
STAY
STARTER \ 1
-'
-C
f. If there are no sparks, replace the plug and check again.
If OK, try to start the engine according to the instructions.
8. If there is still no spark or if the engine still does not start, take the gen-
erator to an authorized Honda dealer.
33