Table of Contents

Advertisement

BASICS

Connectors

Power Consumption 100 W
1.5 A Slo-Blo @ 220 - 240 VAC
3.0 A Slo-Blo @ 110 - 120 VAC
Mains module
This module combines the line cord connector, the on/off switch, the fuse holder with in-
tegrated 230/115 VAC voltage selector and a line filter for providing the transformer with
clean current. Note: Some export version have a fixed voltage of e.g. 100 or 115 VAC and
cannot operate at 230 VAC.
WARNING: High voltage
Make sure to disconnect the line cord before replacing eventually blown fuses or changing
the operating voltage of the unit!
In order to change the operating voltage, the fuse holder has to be taken out and re-in-
serted so that the desired voltage can be read correctly (and is not standing upside down).
The white triangular arrow that belongs to the chosen voltage setting points at the small
rectangular mark on the mains module.
WARNING: Fuses
Always make sure to use the correct fuses for the chosen voltage: 0 VAC 1. A Slo-Blo or
11 VAC .0 A Slo-Blo. Incorrect or missing fuses are dangerous safety hazards for both the
unit and yourself!
Audio outputs (+ dBu)
Pin assignment balanced:
Pin assignment unbalanced:
Audio inputs (+ dBu)
Pin assignment balanced:
Pin assignment unbalanced:
Note: If a device that is placed before the alpha compressor in the signal chain has an un-
balanced output stage, a complete muting can eventually occur when the compressor is
activated. If this happens, please follow the advice on page 34.
LED brightness dimmers
Controller brightness:
Button brightness:

Voltage
220 - 240 VAC ~ 50 Hz
110 - 120 VAC ~ 60 Hz
Made in Germany
WARNING!
RISK OF ELECTRIC SHOCK - DO NOT OPEN!
Fuse Type
elysia GmbH • D-41334 Nettetal • Germany
Controller Brightness
Gnd
Hot
Hot
Gnd
Gnd
1
2
2
1
1
3
3
3
Gnd
Cold
Gnd
Right Out
Right In
Left Out
1 ground
2 hot (+)
1 ground
2 hot (+)
1 ground
2 hot (+)
1 ground
2 hot (+)
light intensity of blue LEDs
light intensity of white LEDs + logo disc
Button Brightness
Hot
Hot
Gnd
2
2
1
3
Cold
Left In
3 ground
3 idle
3 cold (-)
3 ground

Advertisement

Table of Contents
loading

Table of Contents