Pci/Pnp Configurations; Pc Health Status - ECS A780LM-M Manual

34
PCI / PnP Configuration
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Init Display First
Allocate IRQ to PCI VGA
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
Press <Esc> to return to the main menu setting page.

PC Health Status

On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
-=- System Hardware Monitor-=-
Smart Fan Function
Shutdown Temperature
CPU Temperature
CPU Fan Speed
UCore
VDIMM
Case Open Warning
Chasis Opened
: Move
PCI / PnP Setup
PCI
Yes
: Move Enter : Select +/-/: Value
F1:General Help
F9: Load Default Settings
PC Health Status
Press Enter
Disabled
: 44°C/111 ° F
: 2008 RPM
: 1.320V
: 1.786V
Disabled
No
Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help
F9:Optimized Default
Using BIOS
Help Item
Options
PCI-E
PCI
OnBoard
F10: Save ESC: Exit
Help Item