ECS A780LM-M Manual page 33

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
HT Frequency
AMD C&Q
Enhanced Halt (C1E)
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drives
CD/DVD Drives
Boot Other Device
ECS eJIFFY Function
: Move Enter : Select
F1:General Help
HT Frequency (Auto)
This item enables users to manually set up the HyperTransport frequency, ranging
from Auto, 1x, to 5x.
AMD C&Q (Enaled)
This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.
Enhanced Halt (C1E) (Enaled)
This item enables or disables enhanced halt.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Hard Disk Drives (Press Enter)
Scroll to this item and press <Enter> to view the Hard Disk Drives screen
CD/DVD Drives
Scroll to this item and press <Enter> to view the CD/DVD Drives screen
Advanced Setup
Auto
Auto
The HyperTransport link
Disabled
will run at this speed if it is
Enabled
slower than or equal to the
On
system clock and the board
Enabled
is capable.
Sony Storage Media
PIONEER DVD-RM DVR-
Removable Dev.
Press Enter
Press Enter
Yes
Disabled
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
Help Item
29