Table of Contents
Advertisement
ENGLISH
DENON LINK Setup
Set the audio signal to be output from the DENON LINK terminal.
Setting items
DENON LINK Mode
GOffH : Does not use DENON LINK.
Sets the audio output of
G2ndH : Outputs digital audio using DENON LINK 2nd.
DENON LINK.
G3rdH : Outputs digital audio using DENON LINK 3rd.
G4thH : Outputs digital audio using DENON LINK 4th.
Compatible with jitter-free connections. For more information, refer to
"DENON LINK Connection q Making a Jitter-free Connection" (vpage
17).
• HDMI : Improves HDMI digital signal jitter.
• When set to "4th", the HDMI control function becomes available from
the connected device.
• When "4th" is set and jitter-free connection is set up, audio affected
by the jitter-free function is output from the HDMI terminal during BD
playback. When playing back media other than that, the video signal is
output from the HDMI terminal and the audio signal is output from the
DENON LINK terminal, respectively.
• To play DENON LINK 4th signals, connect to a DENON LINK
4th-compatible AV Amp using an HDMI and a DENON LINK cable.
• For information on the 4th setting of the AV Amp, see the owner's
manual of the AV Amp.
n Signals Compatible with DENON LINK Setting and Transmission
The DENON LINK setting for the DENON LINK version of the connected AV Amp is as follows:
The DENON
DENON LINK version of
LINK setting
AV Amp
of the
DBP-A100
2nd Generation
("2nd" displayed near
"2nd"
terminal)
3rd Generation
("3rd" displayed near
"3rd"
terminal)
4th Generation
("4th" displayed near
"4th"
terminal)
Remote control operation
28
buttons
Default settings are underlined.
Setting contents
Media
BD
Super
(During
DVD-
DVD-
audio
jitter-free
Video
Audio
CD
connection)
A
S
S
A
A
S
S
S
S
S
S
S
Displays the menu
:
Cancels the menu
NOTE
With DENON LINK connections, no audio signals other than those of BD are output from the HDMI
terminal.
(When "DENON LINK Mode" is set to "2nd" and "HDMI Setup" – "SA-CD Audio Out" (vpage 24) is set
to "On", the audio signals of Super Audio CD are output from the HDMI terminal.)
Pure Direct Setup
Makes settings for digital audio and video output modes during Pure Direct mode, as well
as for display messages. Two types of setting can be made.
Setting items
User Preset 1/
User Preset 2
Sets the operating mode
for "User Preset 1" or "User
Preset 2" selected by
Setting each of these items
to "Off" enables output of
high quality analog signals
free of interference from
their associated circuits.
CD
SD
S
S
S
S
S
S
Moves the cursor
:
(Up/Down/Left/Right)
Default settings are underlined.
Setting contents
GDigital OutH : Sets whether to output signals to the digital audio output
terminal.
• On : Enables digital audio output.
• Off : Disables digital audio output.
.
GVideo OutH : Sets the option of video output.
• On : Enables video output.
• Off : Disables video output. This setting also disables audio output from
the HDMI terminal.
GDisplayH : Set the option for front panel display.
• On : Turns on the display.
• Off : Turns off the display.
For more information, see "Playing Back High-quality Audio (Pure Direct
Function)" (vpage 38).
:Makes the setting
:Returns to previous menu
Advertisement
Table of Contents
