Audio Setup - Denon DBP-A100 Owner's Manual

Audio Setup

Set the speaker or audio to be output.
Setting related to each channel setting and other audio in the case of outputting analog
audio signals decoded by the DBP-A100.
Setting items
7.1ch Audio Out
Makes the audio setting
Set the speaker confi guration, channel level and distance for multi-
for output of analog 7.1-
channel playback.
channel audio to a multi-
channel amplifi er.
To set "7.1ch Audio Out",
Outputs multi-channel downmixed audio from the front speaker output
set "HDMI Setup" – "Audio
terminals (FL/FR) of the 7.1-channel audio output terminals. Make this
Setup" on the GUI menu to
setting when outputting to a TV and 2-channel amplifi er.
"2Ch" or "Mute" (vpage
NOTE
24).
The 7.1-channel audio output terminals only outputs to FL/FR when you
NOTE
make this setting.
You cannot select "None"
n Speaker Confi guration : Sets the speaker confi guration.
or "No" for "HDMI Setup"
– Audio Setup" – "Multi GFrontH : Sets the front speaker size.
LPCM BM On" – "Speaker • Large : For use with large speakers that can adequately play back low
Confi guration" (vpage 23,
frequencies.
24) on the GUI menu.
• Small : For use with small speakers that cannot adequately play back
low frequencies.
GCenterH : Sets the presence and size of the center speaker.
• Large : For use with large speakers that can adequately play back low
frequencies.
• Small : For use with small speakers that cannot adequately play back
low frequencies.
• None : Select when no center speaker is connected.
GSubwooferH : Sets the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
GSurroundH : Sets the presence and size of the surround speakers.
• Large : For use with large speakers that can adequately play back low
frequencies.
• Small : For use with small speakers that cannot adequately play back
low frequencies.
• None : Select when surround speakers are not connected.
Remote control operation
buttons
Setting contents
Multi Channel
2 Channel
Displays the menu
:
Cancels the menu
Setting items
7.1ch Audio Out
GSurr. BackH : Sets the presence, size and number of surround back
speakers.
• Size : Sets the surround back speaker size.
• Number : Sets the number of surround back speakers.
GCrossover Freq.H : Sets the upper limit of the low frequency signal
output from the subwoofer.
• 40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
• Advanced : Sets the low frequency signals to be output from the
Moves the cursor
:
:Makes the setting
(Up/Down/Left/Right)
Default settings are underlined.
Setting contents
Large : For use with large speakers that can adequately play back low
frequencies.
Small : For use with small speakers that cannot adequately play back
low frequencies.
None : Select when no surround back speakers are connected.
1 spkr : Use only one surround back speaker. Surround back audio is
output from the surround back L terminal.
2 spkrs : Use two surround back speakers.
: Keeps the output level below the set frequency to avoid overloading
the specifi ed low frequency performance of your subwoofer. Sets
one of these frequencies according to the low frequency output
capabilities of your speakers.
signals of the respective speakers to the subwoofer.
Front, Center, Surround, Surr. Back
40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
LFE / LFE+Main
80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
When, on the GUI menu, "Audio Setup" – "7.1ch Audio Out"– "Multi
Channel" – "Speaker Confi guration" – "Subwoofer" is set to "Yes"
(vpage 25), you can select "LFE" or "LFE+Main".
:Returns to previous menu
ENGLISH
See overleaf
25