Barco DC Toolset User Manual page 74

A. Recovery a projector with special plug-in
Image A-2
Create configuration
Image A-3
Add digital cinema projector
Image A-4
Start updater
A.2 Recovery procedure
What should be done?
The recovery of the software is done in different steps:
1. Recovery of the main software called dp80.
2. Reboot of the projector.
3. Updating all other software with intermediate reboot if necessary.
C
AUTION
conditions) ! It may damage the projector.
Recovery of the main software
1. Before pressing Update now, press ALT + SHIFT + T at the same time followed by 0 1 2 (usual key-
board, not numeric keyboard and without looking to the position of the digit on the button, upper row or
lower row).
70
:
Do not use the recovery code for a normal upgrade of a projector (normal
R59770449 DC TOOLSET 15/12/2009