Table of Contents
Advertisement
4. Click OK to make the connection.
Image 4-7
Create connection via host name
Making a connection via a host name is only possible when the host name is known by
the network DNS server.
Via a device scan
1. Select the Connection properties tab (a). (image 4-8)
The right pane changes to the connection setup page.
2. Click on the Device scan button (b).
The Scanning projector progress bar appears. The broadcast query (based on UDP) for projectors
scans the complete LAN network to detect available projectors on the network. The scanning results
are displayed in the Discover projectors dialog box (c). Only the device of the added plug-ins and the
not yet added devices to the configuration are in the list.
3. If you want to add a single device, click on the desired IP address to select (c) and click Select (d).
If you want to add multiple device, hold down the Ctrl key and click on the devices which must be added
in batch (a). Click Select to add the devices (f).
The number of selected devices is added next to Batch.
4. Click OK to make the connection(s).
R59770449 DC TOOLSET 15/12/2009
4. Configurator
31
Advertisement
Table of Contents
