Reset Runtime - Barco iQ PRO G500 Owner's Manual

Image 10-9

10.5 Reset runtime

When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
W
ARNING
technician.
How to reset the lamp runtime in the iQ/iD ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 10-10)
7. Press ENTER
A dialog box is displayed (image 10-11)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 10-10
R5976491 IQ PRO G500 01/02/2007
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
10. Lamp Menu
91