Advertisement
(Please refer to the TOP COVER REMOVAL insert in your literature package).
If possible, the SFS-50 amplifier should be operated without the cage as the tubes will have some-
what better thermal cooling.
VENTILATION
Your SFS-50 amplifier must be placed on a flat hard surface to allow proper air flow through the venti-
lation slots in the bottom panel. Failure to do so may result in overheating of electronic components
inside the unit and possible damage to your amplifier.
PACKING MATERIAL
We recommend that you retain all of the packing material and shipping boxes for your SFS-50 amplifi-
er. They are custom designed to prevent shipping damage from occurring. SONIC FRONTIERS INC.
will accept no responsibility for any damage occurring to amplifiers that are shipped in packing materi-
al other than the original SONIC FRONTIERS INC. packing material.
SAFETY INSTRUCTIONS
1. WATER AND MOISTURE - This product should not be used near water. Do not expose this prod-
uct to rain or moisture to prevent fire or shock hazard.
2. HEAT - This product should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances which produce heat.
3. POWER SOURCES - This product should be connected to an AC power source of the same
rated voltage. The original shipping containers will stipulate the AC voltage this unit can operate on.
4. CLEANING - see previous section in this manual.
5. SERVICING - Do not open this product. NO USER SERVICEABLE PARTS INSIDE. Refer servic-
ing to qualified service technician.
6. NON-USE PERIODS - The power cord of this product should be unplugged from the outlet when
left unused for an extended period of time.
DISCLAIMER OF LIABILITY
Under no circumstances does SONIC FRONTIERS INC. assume liability or responsibility for injury or
damages sustained in the use or operation of this equipment or for damages to any other equipment
connect to it.
Advertisement
