Download Print this page

Packing Material; Safety Instructions - Sonic Frontiers SFC-1 Operating Manual

Control amplifier

Advertisement

CLEANING
The beautiful stainless steel (non-magnetic) finish of the Front Panel and Black Acrylic finish of the chassis will last for
years. A regular dusting with a soft, non-abrasive cloth will generally keep the finish looking like new. Fingerprints may
be removed with a small amount of silicon spray, such as WD-40
not directly onto the chassis, At no time should you allow any liquids to drop onto the amplifiers; it may run into the elec-
tronic circuitry underneath and cause damage which will not be covered under your warranty
VENTILATION
Your SFC-1 amplifier must be placed on a flat hard surface to allow proper air flow through the ventilation slots in the
bottom panel. Failure to do so may result in overheating of electronic components inside the unit and possible damage
to your amplifier.

PACKING MATERIAL

We recommend that you retain all of the packing material and shipping boxes for your SFC-1 amplifier. They are cus-
tom designed to prevent shipping damage from occurring. SONIC FRONTIERS INC. will accept no responsibility for
any damage occurring to amplifiers that are shipped in packing material other than the original SONIC FRONTIERS INC.
packing material.

SAFETY INSTRUCTIONS

1.
WATER AND MOISTURE - This product should not be used near water. Do not expose this product to rain or
moisture to prevent fire or shock hazard.
2.
H E AT - This product should be situated away from heat sources such as ra d i at o rs , h e at regi s t e rs ,
stoves, or other appliances which produce heat.
3.
POWER SOURCES - This product should be connected to an AC power source of the same rated voltage. The
original shipping containers will stipulate the AC voltage this unit can operate on.
4.
CLEANING - see previous section in this manual.
5.
SERVICING - Do not open this product. NO USER SERVICEABLE PARTS INSIDE. Refer servicing to
qualified service technician.
6.
NON-USE PERIODS - The power cord of this product should be unplugged from the outlet when left unused for
an extended period of time.
. Be sure to apply any liquid into a soft cleaning cloth,
4

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Sfc-1