Setting up continue...
8
Calls
9
MENU/OK
10
Stop
TAM HD:
ON/OFF setting
1
MENU/OK
Calls
2
3
MENU/OK
Calls
4
5
MENU/OK
5. Telephone Operation
Ringer volume
To make a
1
Handsfree
call
2
Binatone Help Line - 0845 345 9677
Press UP or DOWN button to set the third
digit of the REMOTE ACCESS code.
Press MENU/OK button to confirm the REMOTE
ACCESS setting.
Press
/STOP button to return to standby mode.
Two different compression rates (ON and OFF) are
provided for you to select the recording quality /
total recording time of incoming messages.
With the compression rate set to ON the recording
quality will be higher, but it will only save up to 8
minutes of messages.
With the compression rate set to OFF the
recording quality will be lower, but it will only
save up to 20 minutes of messages.
Press Menu/OK button.
The display shows
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
Press UP or DOWN button until display shows
TAMHD:ON (or OFF).
Press Menu/OK button to confirm.
The
ON (or OFF)
will be blinking.
Press UP or DOWN button to select ON or OFF.
Press Menu/OK button to confirm the TAM HD
setting.
The Ringer High-Low switch located at the back of the
Base unit allows you to adjust the volume of the ringer.
- High volume
- Low volume
Lift the handset or press the HANDSFREE
button on the Base unit.
Check for dial tone.
Dial the telephone number.
The display shows the duration of the call in
minutes and seconds.
Using the Pre-dial mode
Calls are charged at Local Call rate.
11
.