Belkin G+MIMO User Manual page 53

UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
setting up an allow access list
1� Select the "Allow" radio button (1) to begin setting up a list of
computers allowed to connect to the wireless network�
2� Next, in the "MAC Address" field that is blank (2), type in the MAC
address of the wireless computer you want to be able to access
the wireless network, then click "<<Add" (3)�
3� Continue to do this until all of the computers you want to add have
been entered�
4� Click "Apply Changes" (4) to finish�
(1) (2)
G+ MIMO Wireless Modem Router
1 2 3
(3) (4)
4 5 6
setting up a deny access list
The "Deny Access" list lets you specify computers that you DO NOT
want to access the network� Any computer in the list will not be allowed
access to the wireless network� All others will�
1� Select the "Deny" radio button (1) to begin setting up a list of
computers to be denied access to the wireless network�
2� Next, in the "MAC Address" field that is blank (2), type in the MAC
address of the wireless computer you want to deny access to the
wireless network, then click "<<Add" (3)�
3� Continue to do this until all of the computers you want to deny
access to have been entered�
4� Click "Apply Changes" (4) to finish�
(1)
(2)
(3)
(4)
51
7 8 9 10