Belkin G+MIMO User Manual page 70

UsInG THe Web-based adVanCed UseR InTeRfaCe
sections
table of contents
Changing system settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on
and off the NAT function of the Router�
setting or Changing the administrator Password
The Router ships with NO password entered� If you wish to add a
password for greater security, you can set a password here� Write down
your password and keep it in a safe place, as you will need it if you need
to log into the Router in the future� It is also recommended that you
set a password if you plan to use the remote management feature of
your Router�
G+ MIMO Wireless Modem Router
1 2 3 4 5 6
Changing the login Time-Out setting
The login time-out option allows you to set the period of time that you
can be logged into the Router's advanced setup interface� The timer
starts when there has been no activity� For example, imagine you have
made some changes in the advanced setup interface, then left your
computer alone without clicking "Logout"� Assuming the time-out is set
to 10 minutes, 10 minutes after you leave, the login session will expire�
You will have to log into the Router again to make any more changes�
The login time-out option is for security purposes and the default is set
to 10 minutes� note: Only one computer can be logged into the Router's
advanced setup interface at one time�
68
7 8 9 10