Belkin G+MIMO User Manual page 75

ManUally COnfIGURInG neTWORK seTTInGs
sections
table of contents
5� If "Manually" is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
6� If not already selected, select "Using DHCP" next to "Configure:"
(4), then click "Apply Now"�
your network adapter(s) are now configured for use with the Router�
G+ MIMO Wireless Modem Router
1 2 3 4 5 6
(3)
(5)
(4)
73
7 8 9 10