Belkin F5D8636-4 User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Wireless Router
  5. F5D8636-4
  6. User manual

Belkin F5D8636-4 User Manual

N wireless modem router
Hide thumbs Also See for F5D8636-4:
Table of Contents

Advertisement

Quick Links

F5D8636-4_man updated by ARC
Page 1 of 121
[Note from proofing: keep changes tracked at each revision, this is a uk manual]
[insert title page per branding standard] [needs updated image]
N Wireless Modem Router
User Manual
F5D8636-4
Splash Screen [update with new N background]
[double check the page # and titles]

Table of Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Placement of your N Wireless Modem Router . . . . . . . . . . . . . . . . .x
2 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
3 Knowing your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
4 Connecting and Configuring your Modem Router . . . . . . . . . . . . . . .x
5 Alternate Setup Method . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Changing LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Viewing the DHCP Client List Page . . . . . . . . . . . . . . . . . x
Setting WPA Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Setting WEP Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
Setting MAC Address Control . . . . . . . . . . . . . . . . . . . . . .x
Configuring the Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . x
Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Restarting the Router . . . . . . . . . . . . . . . . . . . . . . . . . x
Updating the Firmware . . . . . . . . . . . . . . . . . . . . . . . . x
8 Recommended Web Browser Settings . . . . . . . . . . . . . . . . .x
9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x
10 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x

Advertisement

Table of Contents
loading

Related Manuals for Belkin F5D8636-4

Summary of Contents for Belkin F5D8636-4

  • Page 1: Table Of Contents

    [Note from proofing: keep changes tracked at each revision, this is a uk manual] [insert title page per branding standard] [needs updated image] N Wireless Modem Router User Manual F5D8636-4 Splash Screen [update with new N background] [double check the page # and titles] Table of Contents 1 Introduction .

  • Page 2: Introduction

    • Simultaneously play games online, check Internet email, and chat Advantages of a Wireless Network Here are some of the advantages of setting up a Belkin Wireless Network: • Mobility – you’ll no longer need a dedicated “computer room”—now you can work on a networked laptop or desktop computer anywhere within your wireless range •...
  • Page 3 Belkin’s N MIMO helps traffic move at the speed limit and opens more lanes—to become the superhighway in this example.

  • Page 4: Placement Of Your N Wireless Modem Router

    10 feet from the Router in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning;...
  • Page 5 To achieve the best wireless network coverage for your “wireless clients” (i.e., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): • Ensure that your Router’s networking antennas are parallel to each other, and are positioned vertically (toward the ceiling).
  • Page 6 • For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your wireless network card. See your network card’s user guide for more information.

  • Page 7: Product Overview

    In minutes you will be able to share your Internet connection and network your computers. The following is a list of features that make your new Belkin N Wireless Modem Router an ideal solution for your home or small office network.
  • Page 8 F5D8636-4_man updated by ARC Page 8 of 121 Web-Based Advanced User Interface You can set up the Router’s advanced functions easily through your web browser, without having to install additional software onto the computer. There are no disks to install or keep track of and, best of all, you can make changes and perform setup functions from any computer on the network quickly and easily.
  • Page 9 F5D8636-4_man updated by ARC Page 9 of 121 The Setup Assistant, second generation of Belkin’s renowned Easy Install Wizard, takes the guesswork out of setting up your Router. This automatic software determines your network settings for you and sets up the Router for connection to your Internet Service Provider (ISP).

  • Page 10: Knowing Your Modem Router

    Knowing your Modem Router Package Contents • Belkin N Wireless Modem Router • Quick Installation Guide • Belkin Personal Network Assistant Software CD with User Manual • RJ11 Telephone Cord • RJ45 Ethernet Networking Cable • ADSL (Asymmetric Digital Subscriber Line) Micro filter* •...
  • Page 11 F5D8636-4_man updated by ARC Page 11 of 121 password _______________ • For static IP users: IP Address ___ . ___ . ___ . ___ Subnet Mask ___ . ___ . ___ . ___ Default Gateway Server ___ . ___ . ___ . •...
  • Page 12 F5D8636-4_man updated by ARC Page 12 of 121 Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The Network Status Display is easily visible on the FRONT of the Router to provide you with information about network activity and status.
  • Page 13 F5D8636-4_man updated by ARC Page 13 of 121 Wireless security is OFF Solid Blue Wireless security is ON Flashing WPS sync is in progress Blue B. Wireless-Computer Status [insert Laptop Icon] Wireless computer is not present Solid Blue Wireless computer is connected to the Router Blinking Problem with wireless computer connecting properly to the Router Amber...
  • Page 14 F5D8636-4_man updated by ARC Page 14 of 121 This unique icon shows you when the Router is connected to the Internet. When the light is off, the Router is NOT connected to the Internet. When the light is blinking amber, the Router is attempting to connect to the Internet. When the light is solid blue, the Router is connected to the Internet.
  • Page 15 F5D8636-4_man updated by ARC Page 15 of 121 G. Connection to ADSL (insert ADSL icon) – Gray This port is for connection to your ADSL. Connect your ADSL to this port. An RJ11 telephone cord is provided in the package. H.

  • Page 16: Connecting And Configuring Your Modem Router

    “Changing the Wireless Security Settings” section for more details. ----------------------------------------------------------------------------------------- Connecting and Configuring your Modem Router Verify the contents of your box. You should have the following: • Belkin N Wireless Modem Router • RJ11 Telephone Cord • RJ45 Ethernet Networking Cable • Power Supply •...
  • Page 17 Page 17 of 121 Setup Assistant Belkin has provided our Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your Windows 2000 or XP computer be connected directly to your ADSL and that the Internet connection is active and working at the time of installation.
  • Page 18 Note: Some ADSL connections require a micro filter. Your ADSL provider can tell you if you need one. Belkin includes a micro filter in regions known to use them. You may or may not have received one in your box.
  • Page 19 F5D8636-4_man updated by ARC Page 19 of 121 (Modem Router illustrate needs to be modified.) E. Wait 20 seconds for the Router to start up. Look at the display on the front of the Router. Make sure the “Wired” and “Router” icons are lit up in blue.
  • Page 20 F5D8636-4_man updated by ARC Page 20 of 121 (Modem Router illustrate needs to be modified.) B. Locate the cable that connects your old modem to your computer. Unplug that cable from your old modem, and plug it into any yellow port labeled “Wired”...
  • Page 21 F5D8636-4_man updated by ARC Page 21 of 121 D. Plug your Router’s power supply into the black port labeled “Power” on the back of your Router. [insert lineart from QIG] (Modem Router illustrate needs to be modified.) E. Wait 20 seconds for the Router to start up. Look at the display on the front of the Router.
  • Page 22 F5D8636-4_man updated by ARC Page 22 of 121 (Modem Router illustrate needs to be modified.) IMPORTANT: Run the Setup Assistant from the computer that is directly connected to the Router from Step 1.1B. [Note, all EZI screenshots are updated] <Insert: EZI1.tif> Note for Windows Users: If the Setup Assistant does not start up automatically, select your CD-ROM drive from “My Computer”...
  • Page 23 F5D8636-4_man updated by ARC Page 23 of 121 Select Country Select your country from the drop-down box. Click “Begin” to continue. [insert EZI2b.tif] Confirmation Screen Verify that you have completed all QIG steps by checking the box to the right of the arrow. Click “Next” to continue. [insert EZI3.tif]...
  • Page 24 F5D8636-4_man updated by ARC Page 24 of 121 Progress Screen Setup Assistant will show you a progress screen each time a step in the setup has been completed. [insert EZI4.tif]...
  • Page 25 F5D8636-4_man updated by ARC Page 25 of 121 2.1 Checking Settings The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s connection to the Internet. [insert EZI5.tif] 2.2 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection. [insert EZI6.tif]...
  • Page 26 F5D8636-4_man updated by ARC Page 26 of 121 2.3 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect.
  • Page 27 F5D8636-4_man updated by ARC Page 27 of 121 2.4 Requesting Internet Account Info (if needed) Select your ISP from the drop-down boxes. [insert EZI10.tif]...
  • Page 28 F5D8636-4_man updated by ARC Page 28 of 121 Note to US model owner: To comply with US FCC regulation, the country selection function has been completely removed from all US models. The above function is for non-US models only. If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below.
  • Page 29 F5D8636-4_man updated by ARC Page 29 of 121 2.6 Checking Internet Connection We are almost done. The Setup Assistant will now check your connection to the Internet. [insert EZI14.tif]...
  • Page 30 Page 30 of 121 Congratulations You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website.
  • Page 31 F5D8636-4_man updated by ARC Page 31 of 121 2.7 Optional: Assistance Connecting Other Computers This optional step will help you to connect additional wired and wireless computers to your network. Follow the on-screen instructions. [insert EZI23.tif]...
  • Page 32 F5D8636-4_man updated by ARC Page 32 of 121 Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working. You can now surf the Internet. Click “Next” to return to the main menu. [insert EZI24.tif]...
  • Page 33 F5D8636-4_man updated by ARC Page 33 of 121 Step 3: Set Up Wireless Security – Run the Security Assistant Software Now that your network is set up and working, it is recommended that you turn on wireless security to prevent unauthorized access to your network from neighboring wireless-enabled computers.
  • Page 34 F5D8636-4_man updated by ARC Page 34 of 121 3.1 Picking the Security Type Select the security type for your wireless network and click “Next” to continue. [insert EZI30.tif]...
  • Page 35 F5D8636-4_man updated by ARC Page 35 of 121 3.2 Creating a Network Key Enter a network key (PSK) for your wireless network and click “Next” to continue. [Insert EZI31.tif] 3.3 Transferring the Key After setting up your wireless security, you will have to transfer the network key to each of your wireless computers.
  • Page 36 F5D8636-4_man updated by ARC Page 36 of 121 3.4 Verifying the Connection If all your wireless computers are able to connect to the Router, click “Next”. If you are having trouble, select “I had problem with at least one computer” and click “Next”. Then, follow on-screen instructions. [insert EZI36.tif] Congratulations...

  • Page 37: Alternate Setup Method

    F5D8636-4_man updated by ARC Page 37 of 121 Once you have verified that your wireless computers are properly connected, your wireless network is set up and secured. You now can run your network wirelessly and securely. Click “Finish” to take you back to the main menu.
  • Page 38 F5D8636-4_man updated by ARC Page 38 of 121 Step 3: Configuring the Router Using the Web-Based Advanced User Interface Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://”...
  • Page 39 F5D8636-4_man updated by ARC Page 39 of 121 Logging out of the Router One computer at a time can log into the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out.
  • Page 40 F5D8636-4_man updated by ARC Page 40 of 121 2. Home Button The home button is available in every page of the UI. Pressing this button will take you back to the home page. 3. Help Button The “Help” button gives you access to the Router’s help pages. Help is also available on many pages by clicking “more info”...
  • Page 41 F5D8636-4_man updated by ARC Page 41 of 121 10. Internet Settings Shows the settings of the Internet/WAN side of the Router that connects to the Internet. Changes to any of these settings can be made by clicking on the links or by clicking on the “Internet/WAN”...
  • Page 42 F5D8636-4_man updated by ARC Page 42 of 121 13. Page Name The page you are on can be identified by this name. This User Manual will sometimes refer to pages by name. For instance “LAN > LAN Settings” refers to the “LAN Settings”...
  • Page 43 F5D8636-4_man updated by ARC Page 43 of 121 • PPPoE • PPPoA • Dynamic/Fixed IP (1483 Bridged) • Static IP (IPoA) • Modem Only (Disable Internet Sharing) Select the type of connection you use by clicking the radio button (1) next to your connection type and then clicking “Next”.
  • Page 44 F5D8636-4_man updated by ARC Page 44 of 121 [FW05.tif] 1. User Name - Enter the user name. (Assigned by your ISP). 2. Password - Enter your password. (Assigned by your ISP). 3. Retype Password - Confirm the password. (Assigned by your ISP). 4.
  • Page 45 F5D8636-4_man updated by ARC Page 45 of 121 (VCI) parameter here. (Assigned by your ISP). 7. Encapsulation - Select your encapsulation type (supplied by your ISP) to specify how to handle multiple protocols at the ATM transport layer. VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads.
  • Page 46 F5D8636-4_man updated by ARC Page 46 of 121 [FW06.tif] For Dynamic IP connection: 1. IP assigned by ISP – Select “Yes” if your ISP instructed you to use Dynamic 2. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here.
  • Page 47 F5D8636-4_man updated by ARC Page 47 of 121 [FW07.tif] For Static IP connection: 1. IP assigned by ISP – Select “No” if your ISP instructed you to use fixed IP. 2. IP Address – Enter an IP address assigned by your ISP for the Router WAN interface.
  • Page 48 F5D8636-4_man updated by ARC Page 48 of 121 Setting your ISP Connection Type to Static IP (IPoA) This connection type is also called “Classical IP over ATM” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet. [FW08.tif] 1.
  • Page 49 Setting Custom Domain Name Server (DNS) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Locaters (URLs) like “www.belkin.com” to IP addresses. Many Internet Service Providers (ISPs) do not require you to enter this information into the Router.

  • Page 50: Using The Web-Based Advanced User Interface

    F5D8636-4_man updated by ARC Page 50 of 121 [FW10.tif] Using the Web-Based Advanced User Interface Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://” or “www”) then press the “Enter” key. [insert IP_Address.tif] Use the same screenshot You will see the Router’s home page in your browser window.
  • Page 51 F5D8636-4_man updated by ARC Page 51 of 121 [FW11.tif]...

  • Page 52: Changing Lan Settings

    There is no need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do NOT make changes to the subnet mask unless you have a specific reason to do so.

  • Page 53: Viewing The Dhcp Client List Page

    IP address to change. 6. Local Domain Name (Optional) The default setting is “Belkin”. You can set a local domain name (network name) for your network. There is no need to change this setting unless you have a specific advanced need to do so.

  • Page 54: Configuring The Wireless Network Settings

    F5D8636-4_man updated by ARC Page 54 of 121 [FW13.tif] Configuring the Wireless Network Settings The “Wireless” tab lets you make changes to the wireless network settings. From this tab you can make changes to the wireless network name or Service Set Identifier (SSID), operating channel, encryption security settings, and configure the Router to be used as an access point.
  • Page 55 F5D8636-4_man updated by ARC Page 55 of 121 [FW14.tif] Note: Please periodically check for new Router firmware updates from the “Utilities > Firmware update” page. Newer firmware can fix problems, add wireless features, and/or improve wireless performance (see page 69). [Designer, Please match page number to the firmware update section] Changing the Wireless Channel There are a number of operating channels from which you can choose—in the...
  • Page 56 F5D8636-4_man updated by ARC Page 56 of 121 Using the Wireless Mode Switch This switch allows you to set the Router’s wireless modes. There are several modes. Note: Some modes may require firmware updates to be enabled. 1) Off This mode will turn OFF the Router’s access point, so no wireless devices can join the network.
  • Page 57 802.11g or 802.11b traffic in the operating environment. Use protected mode if your network consists of a mix of Belkin N Wireless Cards and 802.11g or 802.11b cards on your network. If you are in an environment that includes little to no 802.11g or 802.11b wireless network traffic, you will achieve...
  • Page 58 F5D8636-4_man updated by ARC Page 58 of 121 not ship with security enabled. You may automatically configure the security settings using WPS. To change the security settings manually, you will need to determine which standard you want to use. To access the security settings, click “Security”...
  • Page 59 F5D8636-4_man updated by ARC Page 59 of 121 1. Wi-Fi Protected Setup (WPS): Enabled or Disabled. 2. Personal Identification Number (PIN) Method: In this method, a wireless client wishing to access your network must supply an 8-digit PIN to the Router.
  • Page 60 IMPORTANT: You also need to ensure that all your wireless client cards/adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin wireless cards have driver updates available for download from the Belkin support site: www.belkin.com/networking.

  • Page 61: Setting Wpa Security

    F5D8636-4_man updated by ARC Page 61 of 121 3. For “Encryption Technique”, select “TKIP”, “AES”, or “TKIP+AES”. This setting will have to be identical on the wireless clients that you set up. 4. Enter your pre-shared key (PSK). This can be from eight to 63 characters and can be letters, numbers, or symbols.

  • Page 62: Setting Wep Encryption

    F5D8636-4_man updated by ARC Page 62 of 121 1. From the “Security Mode” drop-down menu, select “WPA-PSK”. 2. For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up. 3. Enter your pre-shared key. This can be from eight to 39 characters and can be letters, numbers, or symbols.
  • Page 63 F5D8636-4_man updated by ARC Page 63 of 121 [FW19.tif] 3. Encryption in the Router is now set. Each of your computers on your wireless network will now need to be configured with the same passphrase. Refer to the documentation of your wireless network adapter for information on making this change.

  • Page 64: Setting Mac Address Control

    F5D8636-4_man updated by ARC Page 64 of 121 [encryption chart.tif][use current image]Use the same image Note to Mac users: Original Apple AirPort products support 64-bit encryption only. Apple AirPort 2 products can support 64-bit or 128-bit encryption. Please check your product to see which version you are using. If you cannot configure your network with 128-bit encryption, try 64-bit encryption.
  • Page 65 F5D8636-4_man updated by ARC Page 65 of 121 2. Next, in the “MAC Address” field that is blank (2), type in the MAC address of the wireless computer you want to be able to access the wireless network, then click “<<Add” (3). 3.

  • Page 66: Configuring The Firewall

    F5D8636-4_man updated by ARC Page 66 of 121 Configuring the Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack Ping of Death (PoD) •...
  • Page 67 F5D8636-4_man updated by ARC Page 67 of 121 Configuring Internal Forwarding Settings The Virtual Servers function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network. Since your internal computers are protected by a firewall, computers outside your network (over the Internet) cannot get to them because they cannot be “seen”.
  • Page 68 F5D8636-4_man updated by ARC Page 68 of 121 Manually Entering Settings into the Virtual Server To manually enter settings, enter the IP address in the space provided for the internal (server) machine, the port(s) required to pass (use a comma between multiple ports), select the port type (TCP or UDP), and click “Apply Changes”.
  • Page 69 F5D8636-4_man updated by ARC Page 69 of 121 To restrict Internet access to a single computer for example, enter the IP address of the computer you wish to restrict access to in the IP fields (1). Next, enter “80” in both the port fields (2). Select “Both” (3). Select “Block” (4). You can also select “Always”...
  • Page 70 F5D8636-4_man updated by ARC Page 70 of 121 To enable this feature, select “MAC Address Filtering” and click “Enable MAC Address Filtering” (1). Next, enter the MAC address of each computer on your network by clicking in the space provided (2) and entering the MAC address of the computer you want to add to the list.

  • Page 71: Using Dynamic Dns

    F5D8636-4_man updated by ARC Page 71 of 121 Enabling the Demilitarized Zone (DMZ) The DMZ feature allows you to specify one computer on your network to be placed outside of the firewall. This may be necessary if the firewall is causing problems with an application such as a game or video conferencing application.
  • Page 72 F5D8636-4_man updated by ARC Page 72 of 121 The Dynamic DNS service is ideal for a home website, file server, or to make it easy to access your home PC and stored files while you’re at work. Using the service can ensure that your host name always points to your IP address, no matter how often your ISP changes it.
  • Page 73 F5D8636-4_man updated by ARC Page 73 of 121 [FW28.tif] Blocking an ICMP Ping Computer hackers use what is known as “pinging” to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there.

  • Page 74: Utilities

    F5D8636-4_man updated by ARC Page 74 of 121 [Fw29.tif] To turn off the ping response, select “Block ICMP Ping” (1) and click “Apply Changes”. The Router will not respond to an ICMP ping. Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions.

  • Page 75: Restarting The Router

    F5D8636-4_man updated by ARC Page 75 of 121 [FW30.tif] Restarting the Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings. [FW31.tif] Restarting the Router to Restore Normal Operation 1.
  • Page 76 F5D8636-4_man updated by ARC Page 76 of 121 2. The following message will appear. Click “OK”. [FW32.tif] 3. The following message will appear. Restarting the Router can take up to 60 seconds. It is important not to turn off the power to the Router during the restart.
  • Page 77 F5D8636-4_man updated by ARC Page 77 of 121 [FW34.tif] 1. Click the “Restore Defaults” button. 2. The following message will appear. Click “OK”. [FW35.tif]...
  • Page 78 F5D8636-4_man updated by ARC Page 78 of 121 3. The following message will appear. Restoring the defaults includes restarting the Router. It can take up to 60 seconds. It is important not to turn the power to the Router off during the restart. [FW36.tif] 4.
  • Page 79 F5D8636-4_man updated by ARC Page 79 of 121 Click “Save”. A window called “File Download” will open. Click “Save”. [FW38.tif]...
  • Page 80 F5D8636-4_man updated by ARC Page 80 of 121 2. A window will open that allows you to select the location where you want to save the configuration file. Select a location. You can name the file anything you want, or use the default name “user.conf”. Be sure to name the file so you can locate it yourself later.
  • Page 81 F5D8636-4_man updated by ARC Page 81 of 121 3. When the save is complete, you will see the window below. Click “Close”. [FW40.tif] 4. The configuration is now saved. Restoring a Previous Configuration This option will allow you to restore a previously saved configuration. [FW41.tif]...
  • Page 82 F5D8636-4_man updated by ARC Page 82 of 121 1. Click “Browse”. A window will open that allows you to select the location of the configuration file. All configuration files end with a “.conf”. Locate the configuration file you want to restore and double-click on it. [FW42.tif] 2.

  • Page 83: Updating The Firmware

    = 192.168.2.1) into the navigation bar of your browser. Updating the Firmware From time to time, Belkin may release new versions of the Router’s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed. When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to...
  • Page 84 F5D8636-4_man updated by ARC Page 84 of 121 Checking for a New Version of Firmware The “Check Firmware” (1) button allows you to instantly check for a new version of firmware. When you click the button, a new browser window will appear informing you that either no new firmware is available or that there is a new version available.
  • Page 85 F5D8636-4_man updated by ARC Page 85 of 121 A window will open that allows you to select the location where you want to save the firmware file. Select a location. You can name the file anything you want, or use the default name. Be sure to locate the file in a place where you can locate it yourself later.
  • Page 86 F5D8636-4_man updated by ARC Page 86 of 121 3. The download of the firmware is complete. To update the firmware, follow the next steps in “Updating the Router’s Firmware”. Updating the Router’s Firmware 1. In the “Firmware Update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file.
  • Page 87 F5D8636-4_man updated by ARC Page 87 of 121 The “Update Firmware” box will now display the location and name of the firmware file you just selected. Click “Update”. [FW46.tif] 3. You will be asked if you are sure you want to continue. Click “OK”. [FW47.tif] 4.
  • Page 88 F5D8636-4_man updated by ARC Page 88 of 121 [FW48.tif] 5. A 60-second countdown will appear on the screen. When the countdown reaches zero, the Router firmware update will be complete. The Router home page should appear automatically. If not, type in the Router’s address (default = 192.168.2.1) into the navigation bar of your browser.
  • Page 89 Internet and get a response. You cannot set the clock yourself. [FW49.tif] Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router’s settings from anywhere on the Internet.
  • Page 90 Enabling/Disabling UPnP UPnP (Universal Plug-and-Play) is yet another advanced feature offered by your Belkin Router. It is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP- compliant. Some applications require the Router’s firewall to be configured in a specific way to operate properly.

  • Page 91: Manually Configuring Network Settings

    F5D8636-4_man updated by ARC Page 91 of 121 Enabling/Disabling Auto Firmware Update This innovation provides the Router with the built-in capability to automatically check for a new version of firmware and alert you that the new firmware is available. When you log into the Router’s advanced interface, the Router will perform a check to see if new firmware is available.
  • Page 92 F5D8636-4_man updated by ARC Page 92 of 121 1. Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”. 2. You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet” in the “Connect via:” drop-down menu (1). [xxxxxxx][use current image] [keep] 3.
  • Page 93 F5D8636-4_man updated by ARC Page 93 of 121 4. If not already set, at “Configure:”, choose “Using DHCP Server”. This will tell the computer to obtain an IP address from the Router. [xxxxxxx] [use current image] [keep] 5. Close the window. If you made any changes, the following window will appear. Click “Save”.
  • Page 94 F5D8636-4_man updated by ARC Page 94 of 121 3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu. [xxxxxxx] [use current image] [keep] 4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE”...
  • Page 95 F5D8636-4_man updated by ARC Page 95 of 121 Manually Configuring Network Settings in Windows 2000, NT, or XP 1. Click “Start”, “Settings”, then “Control Panel”. 2. Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP). 3.
  • Page 96 F5D8636-4_man updated by ARC Page 96 of 121 4. In the “Local Area Connection Properties” window, click “Internet Protocol (TCP/IP)” and click the “Properties” button. The following screen will appear: [XP TCPIP.tif] [use current image] [keep] 5. If “Use the following IP address” (2) is selected, your Router will need to be set up for a static IP connection type.
  • Page 97 F5D8636-4_man updated by ARC Page 97 of 121 Manually Configuring Network Settings in Windows 98 or Me 1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2. Select “TCP/IP -> settings” for your installed network adapter. You will see the following window.
  • Page 98 F5D8636-4_man updated by ARC Page 98 of 121 [win2k settings chart.tif] [keep] [use current image] 7. If not already selected, select “Obtain IP address automatically” on the IP address tab. Click “OK”. Restart the computer. When the computer restarts, your network settings are now configured for use with the Router.

  • Page 99: Recommended Web Browser Settings

    F5D8636-4_man updated by ARC Page 99 of 121 Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section.
  • Page 100 F5D8636-4_man updated by ARC Page 100 of 121 [IE6_Internet_Optio ns_Connections.jpg 3. Under the “Internet Options” screen, click on “Connections” and select “LAN Settings…”.
  • Page 101 F5D8636-4_man updated by ARC Page 101 of 121 4. Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet Options” page.

  • Page 102: Troubleshooting

    2. Next, double-click on the CD-ROM drive that the Setup Assistant Software CD has been placed in to start the installation. [encircle on “Belkin Setup Assistant” icon.] 3. The Setup Assistant should start within a few seconds. If, instead, a window appears showing the files on the CD, double-click on the icon labeled “SetupAssistant.exe”.
  • Page 103 F5D8636-4_man updated by ARC Page 103 of 121 4. If the Setup Assistant still does not start, reference the section titled “Manually Configuring Network Settings” (page 86 of this User Manual)(verify the page #) for an alternate setup method. Problem: The Setup Assistant cannot find my Router.
  • Page 104 F5D8636-4_man updated by ARC Page 104 of 121 2. Unplug power to the Router for 10 seconds, and then plug the power back into the Router. Ensure that the Router’s Power light is on; it should be solid green. If not, check to make sure that the AC adapter is correctly connected to the Router and plugged into a wall outlet.
  • Page 105 • You may need to configure your Router to meet the specific requirements of your ISP. To search our Knowledge Base for ISP-specific issues, go to: http://web.belkin.com/support and type in “ISP” If you are still unable to access the Internet after verifying these settings, please contact Belkin Technical Support.
  • Page 106 If you are unable to connect to the Internet from a wireless computer, please do the following: 1. Look at the lights on your Router. Your Belkin Router’s lights should be as follows: • The “Power” light should be on.
  • Page 107 “Broadcast SSID” is enabled. This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Problem: My wireless network performance is inconsistent.
  • Page 108 • For 802.11g (54g™) wireless networks, Belkin offers a Wireless G Range Extender/Access Point that can be connected wirelessly to a Belkin G Wireless Router, without requiring an Ethernet cable or Powerline Ethernet Adapters. These Belkin products are available at your local retailer, or can be ordered from Belkin directly.
  • Page 109 Powerline USB Adapter (F5D4050) Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Router or Belkin Access Point. Solution: 1. Log into your Wireless Router or Access Point. Open your web browser and type in the IP address of the Wireless Router or Access Point.
  • Page 110 Utility” screen. The “Advanced” button will allow you to view and configure more options of your client card. 2. Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin client card.
  • Page 111 F5D8636-4_man updated by ARC Page 111 of 121 You also need to download the latest driver for your Belkin Wireless 802.11g Desktop or Notebook Network Card from the Belkin support site. Other operating systems are not supported at this time. Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802.11g products.
  • Page 112 Utility” screen. The “Advanced” button will allow you to view and configure more options of your client card. 2. Once the “Advanced” button is clicked, the Belkin Wireless LAN Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin client card.
  • Page 113 F5D8636-4_man updated by ARC Page 113 of 121 http://www.microsoft.com/downloads/details.aspx?FamilyID=009d8425-ce2b-47a4-abec- 274845dc9e91&displaylang=en [keep hyperlink since this is on CD] Note: The file that Microsoft has made available works only with Windows XP. Other operating systems are not supported at this time. You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site.
  • Page 114 F5D8636-4_man updated by ARC Page 114 of 121 Technology (802.11g) MIMO (draft 802.11n with (draft (802.11g MIMO) 802.11n with MIMO with MRC) MIMO) Speed* Up to Up to Up to 300Mbps* Up to 54Mbps* 54Mbps* 300Mbps* Frequency Common Common Common household Common household household...
  • Page 115 802.11n specifications and may require a software upgrade for best results. Technical Support You can find technical-support information on our website, www.belkin.com, by navigating to the tech-support section. If you want to contact technical support by phone, please call the number you need from the list below*: *Local rates apply.

  • Page 116: Information

    F5D8636-4_man updated by ARC Page 116 of 121 Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 117 F5D8636-4_man updated by ARC Page 117 of 121 Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 118 This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. Contact information in the USA COMPANY: Belkin International, Inc. ADDRESS: 501 West Walnut Street, Compton, CA 90220-5221, USA...
  • Page 119 (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
  • Page 120 Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.
  • Page 121 +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac, Mac OS, Apple, and AirPort are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

Table of Contents