Table of Contents
Advertisement
CPU VCore [1.750V] (for Willamette) , [1.500V] (for Northwood)
When the CPU VCore Setting parameter above is set to [Manual], the
CPU VCore item allows you to select a specific CPU core voltage. This
field is not accessible when the CPU VCore Setting is set to [Auto].
Depending on the OVER_VOLT jumper setting (see page 2-19 for the
jumper location and settings), the CPU core voltage options vary for both
Willamette and Northwood processors. See the following table.
Refer to the CPU documentation before setting this field. A very high
core voltage may severely damage the CPU!
OVER_VOLT
Jumper
P4 Processor
Willamette
Northwood
DDR Reference Voltage [2.6V]
This item controls the DDR SDRAM operating voltage. Configuration
options: [2.9V] [2.7V] [2.6V]
AGP VDDQ Voltage [1.5V]
This item controls the AGP operating voltage. Configuration options: [1.7V]
[1.6V] [1.5]
Hyper-Threading Technology [Enabled]
This item allows you to enable or disable the processor Hyper-Threading
Technology. Configuration options: [Disabled] [Enabled]
The item Hyper-Threading Technology appears only if you installed
an Intel Pentium 4 CPU that supports this feature.
ASUS P4B533-E motherboard user guide
Disabled
1.750V, 1.775V, 1.800V,
1.825V, 1.850V
1.500V, 1.525V, 1.550V,
1.575V, 1.600V, 1.625V,
1.650V, 1.675V, 1.700V
Enabled
1.750V, 1.775V, 1.800V,
1.825V, 1.850V, 1.875V,
1.900V, 1.925V, 1.950V
1.500V, 1.525V, 1.550V,
1.575V, 1.600V, 1.625V,
1,650V, 1.675V, 1.700V,
1.725V, 1.750V, 1.775V,
1.800V
4-19
Advertisement
Table of Contents
