Table of Contents
Advertisement
16. Front panel line in connector (5-pin FP_LINE_IN)
(on audio models only)
This connector is for a front panel Line In jack with a return path for
automatic signal switching. By default, pins 1-2 and pins 3-4 are
shorted with jumper caps to make the Line In source available from the
rear panel Line In jack. Remove the jumper caps if you desire to install
the Intel front panel audio cable.
P4B533-E
®
P4B533-E LINE_IN Connector
17. Digital audio connector (6-1 pin SPDIF) (on audio models only)
This connector is for the bundled S/PDIF audio module that allows
digital instead of analog sound output. Connect one end of the audio
cable to the S/PDIF In/Out connector on the motherboard, and the
other end to the S/PDIF module.
P4B533-E
®
P4B533-E Digital Audio Connector
2-34
FP_LINE_IN
SPDIF
1
Chapter 2: Hardware information
Advertisement
Table of Contents
