Table of Contents
Advertisement
IEEE 1394 controller. The NEC PD72874GC PCI-to-1394
19
controller is fully compliant with the 1394 Open Host Controller
Interface (OHCI) specification 1.1. This device allows data transfers
between the 33MHz PCI bus and the 1394 bus at 100Mbps,
200Mbps, and 400Mbps through a 1394 port. It also provides PCI
bus master bursting, and is capable of transferring a cacheline data
at 132MB/s to support digital electronic devices. The PD72874GC
is fully interoperable with FireWire and i.LINK implementations of
IEEE Std 1394. (on 1394 models only)
20
PCI slots. These six 32-bit PCI 2.2 expansion slots support bus
master PCI cards like SCSI or LAN cards with 133MB/s maximum
throughput.
Audio controller. This C-Media 6-channel PCI audio chip supports
21
legacy audio and HRTF 3D positional audio functions. The chip
also supports 24-bit S/PDIF In (0.5~5V) and S/PDIF Out (44.1K
and 48K formats) professional digital audio interface.
(on audio models only)
22
AGP PRO slot. This Accelerated Graphics Port (AGP) PRO slot
supports 1.5V AGP4X mode graphics cards for 3D graphical
applications.
LAN PHY. This Intel 82562ET LAN PHY works with the integrated
23
MAC in the south bridge (ICH4) to fully support 10BASE-T/
100BASE-TX Ethernet networking. (on LAN models only)
24
PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.
25
Parallel port. This 25-pin port connects a parallel printer, a
scanner, or other devices.
26
RJ-45 port. This port allows connection to a Local Area Network
(LAN) through a network hub. (on LAN models only)
27
Line In jack. This Line In (light blue) jack connects a tape player or
other audio sources. In 6-channel mode, the function of this jack
becomes Rear Speaker Out. (on audio models only)
28
Line Out jack. This Line Out (lime) jack connects a headphone or
a speaker. In 6-channel mode, the function of this jack becomes
Front Speaker Out. (on audio models only)
1-10
Chapter 1: Product introduction
Advertisement
Table of Contents
