Table of Contents
Advertisement
12. Infrared module connector (5-1 pin IR_CON)
This connector supports an optional wireless transmitting and receiving
infrared module. This module mounts to a small opening on system
chassis that support this feature. You must also configure the UART2
Use As parameter in BIOS to set UART2 for use with IR. See section
"4.4.2 I/O Device Configuration" for details.
Use the five pins as shown in Back View and connect a ribbon cable
from the module to the motherboard SIR connector according to the
pin definitions.
P4B533-E
®
P4B533-E Infrared Module Connector
13. GAME/MIDI connector (16-1 pin GAME)
This connector supports a GAME/MIDI device. If your package came
with the optional USB 2.0/GAME module, connect the GAME/MIDI
cable to this connector. The GAME/MIDI port on the module connects
a joystick or a game pad for playing games, and MIDI devices for
playing or editing audio files.
P4B533-E
®
P4B533-E Game Connector
2-32
IR_CON
Front View
1
GAME
9
16
1
8
Chapter 2: Hardware information
Back View
IRTX
+5V
(NC)
GND
IRRX
Advertisement
Table of Contents
