Setup - Offset And Min-Max Values - Fluke 574 User Manual

Setup - Offset and Min-Max Values

OFFSET
This function is used with a
selected emissivity to add
or subtract an offset value
(±10°C/±18°F) to the
temperature value. Press
the Setup button (N) until
"Offset" appears in the
display. With the arrow
keys (C) adjust the display
to the corrected value.
Press ENTER (D) to
confirm. The OFFSET feature allows the temperature
values for several units to be matched, correcting for
the allowed temperature tolerance difference between
units. The OFFSET function can also be used to
increase the accuracy for a narrow temperature range.
MODE
MIN-MAX VALUES MIN-MAX VALUES MIN-MAX V
T To show the minimum To show the minimum
and maximum
temperature values dur-
ing a measurement at the
bottom of the display,
press MODE (O) until the
two values appear (6).
MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX
MODE
MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF DIF
N
O
AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG AVG TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC TC/NTC MIN-MAX MIN-MAX
574
C
D
6
21