Reverse Sewing; Removing The Work - Euro-Pro 380 Instruction Manual

Reverse sewing / Coser hacia atrás
Reverse sewing is used for locking the end of seams and where
reinforcement is needed.
At the end of a seam, press down the reverse sewing lever
(Fig 1) and touch the foot control lightly. Sew a few reverse stitches.
(Fig. 2) Release lever and the machine will sew forward again.
Al final de la costura apretar el botón de retroceso. (Fig. 1) Coser algunos
puntos hacia atrás. (Fig. 2) Apenas se suelta el botón, la máquina cose de
.
nuevo hacia adelante
Removing the work / Como sacar la labor de la máquina
Turn the handwheel towards you to bring the thread take up lever to its highest
position.
Raise the presser foot and draw the fabric away from you. (Fig. 3)
Colocar la palanca tensora del hilo en su posición más (girar el volante hacia
adelante), levantar el pie y retirar la labor tirando hacia atrás. (Fig. 3)
Fig. 1
Fig. 3
Fig. 2
21