Directwire Examples - ESI MaXiO series System Manual

MaXiO series
The number on the row represents the input or output port.
The columns represent ins and outs (on and off) of the respected drivers.
Patch the virtual cables from one point to another as you drag the mouse.
INPUT section is a new feature of DirectWIRE 3.0. It is used to route signals from MaXiO's
hardware inputs.
MME section represents general application's I/O:
Ex.) WinAmp, WaveLab (non ASIO mode), Cakewalk, Audition, Vegas, etc.
WDM section represents Multi-MME application's I/O:
Ex.) SONAR (when using WDM/KS), PowerDVD, WinDVD, etc.
ASIO section represents ASIO application's I/O:
Ex.) Cubase, Logic, Reason, Nuendo, SONAR (when using ASIO), Samplitude, etc.
GSIF section represents GSIF application like GigaStudio.
Note: some applications support multiple driver modes.

7.3 DirectWIRE examples

Example 1. Recording from WinAmp(MME) to WaveLab(MME):
Note: If you want to record what's played back in WinAmp, but don't want to hear the sound, you
should click the 'OUT' button in the MME section so it'll change to 'OFF' (
System Manual
)
.
47